Westcoast Custom Gates

 

4000XLS

4000XLS Image

The PRO-SW4000XLS/4200XLS series will operate a gate up to 20 ft. (6.1 m) long and weighing
1000 lbs. (453 kg) each leaf if all proper installation procedures have been followed. Ball bearing
hinges should be used on all gates weighing over 250 lbs. (113.4 kg).
FEATURES:
▶ One button auto-memorization of digital transmitter code.
▶ Includes battery backup, 318 MHz RF radio receiver, entry
transmitter, AC transformer and all necessary mounting
hardware for a post mounted installation, 19˝ (48.3 cm) total
offset.
MECHANICAL:
• The GTO® control board can be programmed for pull-to-open or
push-to-open.
• Operating temp -5 F (-21C) to +160 F (71 C).
• Opening time: from 18 to 20 seconds (typical installation).
• Range of arm stroke: is up to 22˝ (56 cm).
• Operator length: with arm fully retracted is 46.25˝ (118 cm),
mounting point to mounting point.
• Operation, diagnostic and safety alarms.
• Inherent obstruction sensing.
• Soft start/soft stop—for long mechanical life expectancy.
• Auto close adjustable 3–120 seconds delay.
ELECTRICAL/POWER:
• 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
Battery charge is maintained by a 120V AC/60 Hz input, 18V AC,
40 VA output, transformer through control board.
• Powered by a reliable 12 Volt (120 Watt) DC motor, 16:1 planetary
gear drive system.
• Charging regulated circuit on control board. “Sleep draw” is 15
mA; “active draw” is 3 to 7 amps.


Your Price:C$1,290.00